Holding the camera charging the battery pack, Holding the camera, Charging the battery pack – Canon PowerShot SX540 HS User Manual
Page 18
18
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
3
Remove the battery pack.
●
After unplugging the battery charger,
remove the battery pack by pushing it in
(1) and up (2).
●
To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
●
For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
●
For details on charging time and the number of shots and
recording time possible with a fully charged battery pack, see
“Number of Shots/Recording Time, Playback Time” (= 179).
●
Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
●
The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
(2)
(1)
Holding the Camera
●
Place the strap around your neck.
●
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1
Insert the battery pack.
●
After aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
2
Charge the battery pack.
●
CB-2LY: Flip out the plug (1) and plug the
charger into a power outlet (2).
●
CB-2LYE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
●
The charging lamp turns orange, and
charging begins.
●
When charging is finished, the lamp turns
green.
(1)
(2)
CB-2LY
(1)
(2)
CB-2LYE