Canon PowerShot SX540 HS - Manual (Page 41)

41
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
● A face may not be displayed at a constant size relative to the
screen at some zoom factors, or if the person’s head is tilted or
facing the camera indirectly.
● During movie recording, zoom factor changes and camera
operating sounds are recorded.
● When [ Auto: On] is set, some shooting information is not
displayed, and some shooting settings cannot be configured.
● The camera will not auto zoom to fit multiple people in the screen
when multiple faces are detected while shooting a movie.
● Auto zoom cannot be used while using the continuous shooting
function.
● If multiple faces are detected in step 1, press the [ ] button to
choose the face for automatic zooming.
● If the person detected by the camera moves toward the edge of
the screen, the camera zooms out to keep the person in view.
● The zoom factor will not change after you press the shutter button
all the way down in self-timer mode (= 43).
● Depending on the shoot conditions and the subject’s movement,
the face size may not maintained in order to fit the subject on the
screen.
● When the camera cannot detect a face, move the zoom to any
position and stop the zoom until the face is detected.
Zooming Automatically According to the Movement
of the Subject (Auto Zoom)
Still Images Movies
The camera automatically zooms in and out to keep a detected face
(= 75) at a constant size on the screen. If the person moves closer, the
camera automatically zooms out, and vice versa. This size can also be
adjusted, as needed.
1
Enter Auto mode.
● Press and release the [ ] button quickly.
● [ ] is displayed.
● A white frame is displayed when a face
is detected. The camera will zoom
automatically to fit the person (subject) in
the screen.
● When multiple faces are detected, the
main subject is displayed in a white frame
and the other faces (maximum of two) are
displayed in gray frames. The camera will
zoom automatically to fit multiple people
in the screen.
2
Shoot.
● The frames are displayed even after
taking the shot and the camera will zoom
automatically.
● To cancel this mode, press the [ ]
button again. [ Auto: Off] is displayed.