Using another access point previous access points – Canon PowerShot SX540 HS User Manual
Page 117
117
Before Use
Basic Guide
Advanced Guide
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
5
Choose the camera to connect.
●
Once the screen to choose the camera
to connect to is displayed on the
smartphone, choose the camera and pair
it to the smartphone.
6
Configure the privacy settings and
send images.
●
Follow steps 8 – 9 in “Adding a
Smartphone” (= 115) to configure the
privacy settings and send images.
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Adding a Smartphone” (= 115).
●
To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
●
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Using Another Access Point” (= 117) from step 4.
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi menu,
you can also use an existing access point.
1
Prepare for the connection.
●
Access the [Waiting to connect] screen
by following steps 1 – 4 in “Adding a
Smartphone” (= 115).
2
Connect the smartphone to the
access point.
3
Choose [Switch Network].
●
Press the [ ][ ] buttons to choose
[Switch Network], and then press the [ ]
button.
●
A list of detected access points will be
displayed.
4
Connect to the access point.
●
For WPS-compatible access points,
follow steps 5 – 8 in “Using WPS-
Compatible Access Points” (= 120) to
connect to the access point.
●
For non-WPS access points, follow steps
2 – 4 in “Connecting to Listed Access
Points” (= 122) to connect to the
access point.