Easily identifying the focus area (mf peaking), Digital tele-converter – Canon PowerShot SX540 HS User Manual
Page 74
74
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Digital Tele-Converter
Still Images
Movies
The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster
than it would be if you zoomed (including using digital zoom) in to the
same zoom factor.
●
Press the [
] button, choose
[Digital Zoom] on the [ ] tab, and then
choose the desired option (= 29).
●
The view is enlarged and the zoom factor
is displayed on the screen.
●
The digital tele-converter cannot be used with digital zoom
(= 38) or AF-point zoom (= 52).
●
The shutter speed may be equivalent when you move the zoom
lever all the way toward [
] for maximum telephoto, and when
you zoom in to enlarge the subject to the same size following step
2 in “Zooming In Closer on Subjects (Digital Zoom)” (= 38).
●
When you focus manually, the AF frame mode (= 75) is locked
to [Center] and AF frame size is locked to [Normal].
●
Focusing is possible when using the digital zoom (= 38) or
digital tele-converter (= 74), or when using a TV as a display
(= 148), but the magnified display will not appear.
●
To focus more accurately, try attaching the camera to a tripod to
stabilize it.
●
To hide the magnified display area, choose MENU (= 29) >
[
] tab > [MF-Point Zoom] > [Off].
●
To deactivate automatic focus fine-tuning when the shutter button
is pressed halfway, choose MENU (= 29) > [
] tab > [Safety
MF] > [Off].
Easily Identifying the Focus Area (MF Peaking)
Still Images
Movies
Edges of subjects in focus are displayed in color to make manual focusing
easier. You can adjust the colors and the sensitivity (level) of edge
detection as needed.
1
Access the setting screen.
●
Press the [
] button, choose [MF
Peaking Settings] on the [ ] tab, and
then choose [On] (= 29).
2
Configure the setting.
●
Choose a menu item to configure, and
then choose the desired option (= 29).
●
Colors displayed for MF Peaking are not recorded in your shots.