Choosing effects, Recording movies with a variety of effects, Enjoying a variety of images from each shot – Canon PowerShot SX540 HS User Manual
Page 57
57
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
●
Shooting will take some time when the flash fires, but hold the
camera steady until the shutter sound is played three times.
●
The six images are managed together as a group (= 90).
●
Simultaneous display of the six images as shown in step 2 is only
available immediately after you shoot.
Choosing Effects
You can choose effects for images captured in [
] mode.
●
After choosing [
] mode, turn the [
]
dial to choose the effect.
Auto
All effects
Retro
Images resemble old photos
Monochrome
Images are generated in one color
Special
Bold, distinctive-looking images
Natural
Subdued, natural-looking images
Recording Movies with a Variety of Effects
Once the movie is shot, the camera determines the subject and shooting
scene and automatically applies various effects such as slow motion
and fast motion. The camera automatically combines a maximum of four
movies into a short movie of approximately 15 – 25 seconds (Creative
Shot). Note that sound is not recorded.
1
Enter [ ] mode.
●
Set the mode dial to [ ].
Enjoying a Variety of Images from
Each Shot (Creative Shot)
Still Images
Movies
Enjoying a Variety of Images from Each Shot
The camera determines the subject and shooting conditions, automatically
applying special effects and recomposing the shot to emphasize the
subject. Six still images are recorded for each shot. You can capture
multiple still images with effects using camera-determined settings.
1
Enter [
] mode.
●
Set the mode dial to [
].
2
Shoot.
●
Press the shutter button all the way
down. As you shoot, the shutter sound is
played three times.
●
After the six images are displayed
in succession, they are displayed
simultaneously for about two seconds.
●
To keep the images displayed until you
press the shutter button halfway, press
the [ ] button. For full-screen display in
this state, choose an image by pressing
the [ ][ ][ ][ ] buttons, and then press
the [ ] button.
●
To return to the original display, press the
[
] button.