Canon PowerShot SX540 HS - Manual (Page 55)

55
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (= 55).
2
Configure the setting.
● Choose [Display Info], and then choose
the desired option.
● To restore the original setting, repeat this
process but choose [Off].
Off Displays only the image.
Detailed Displays shooting details (= 168).
● When [Display Time] (= 55) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. You can also erase
images by pressing the [ ] button, or protect (= 94) or tag
images as favorites (= 100) by pressing the [ ] button.
Changing the Image Display Style after Shots
Still Images Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after
shooting] screen.
● Press the [ ] button, choose
[Review image after shooting] on the
[ ] tab, and then press the [ ] button
(= 29).
2
Configure the setting.
● Choose [Display Time], and then choose
the desired option.
● To restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec.,
4 sec.,
8 sec.
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off No image display after shots.