Canon PowerShot SX540 HS - Manual (Page 38)

38
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Common, Convenient Features
Zooming In Closer on Subjects (Digital Zoom)
Still Images Movies
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 200x enlargement.
1
Move the zoom lever toward [ ].
● Hold the lever until zooming stops.
● Zooming stops at the largest possible zoom
factor (before the image becomes noticeably
grainy), which is then indicated on the screen.
2
Move the zoom lever toward [ ] again.
● The camera zooms in even closer on the
subject.
● (1) is the current zoom factor.
● Moving the zoom lever will display the zoom bar which indicates
the zoom position. The color of the zoom bar will change
depending on the zoom range.
- White range: optical zoom range where the image will not appear grainy.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
● Because the blue range will not be available at some resolution
settings (= 50), the maximum zoom factor can be achieved by
following step 1.
(1)
On-Screen Frames
Still Images Movies
In [ ] mode, a variety of frames are displayed once the camera
detects subjects you are aiming the camera at.
● A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white
frame will remain on the screen.
● When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus
and image brightness are constantly adjusted (Servo AF).
● Try shooting in [ ] mode (= 68) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.