Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 103)

Menu List
103
Menu item Value (bold text: default value) Explanation
AUX/SOURCE INDICATOR OFF, ON
Sets whether to display the AUX/SOURCE indicators in the monitor.
Color Explanation
Yellow
Shows that this has been selected as an inset screen for
the PinP & KEY.
Magenta Shows that this has been selected as a DSK video source.
Green
Shows that this has been selected as an AUX bus video
source.
REC INDICATOR OFF, ON
Sets whether to display the REC indicator in the monitor.
When this is “ON,” a REC indicator showing that the camera’s REC button has been pressed is
displayed, if the unit is connected to a camera that supports the REC status function.
AUDIO LEVEL METER OFF, ON Specifies whether to display the audio level meter in the monitor.
MASTER OUTPUT OFF, LEFT, RIGHT
Sets the display position of the audio level meter.
When this is “OFF,” the level meter is always hidden.
* This is displayed in the multi-view. AUX OFF, LEFT , RIGHT
USB OUT OFF, LEFT , RIGHT
AUDIO IN/USB/Bluetooth OFF , LOWER, UPPER
MULTI-VIEW LABEL OFF, ON Specifies whether to display the label in the monitor.
AUTO HIDE OFF, ON When this is “ON,” the label is hidden while the menu is open.
MULTI-VIEW LABEL EDIT
HDMI 1 – 8, SDI 1–8, STILL
1–16, PGM, SUN PGM, PVW
Edit the label name shown in the monitor.
Press the [VALUE] knob to access the LABEL EDIT screen.
MULTI-VIEW LABEL SIZE SMALL, NORMAL Specifies the text size of the label shown in the monitor.
MULTI-VIEW LAYOUT Specifies the videos to be shown in the PVW section (LEFT) and PGM section (RIGHT) in the multi-view.
LEFT
RIGHT
PROGRAM Final output video. This is the default setting for “RIGHT.”
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video. This is the default setting for “LEFT.”
BLACK Black screen
HDMI OUT 3 OSD
ENTER Displays the HDMI OUT 3 OSD menu.
Sets whether to show the menu and other display elements in the video output from the HDMI OUT 3 connector.
Menu item Value Explanation
ON SCREEN MENU OFF, ON Menu
TALLY FRAME OFF, ON Tally frame
LABEL/LEVEL METER/INDICATOR OFF, ON Label, audio level meter, REC/AUX/SOURCE indicator
AUTO INPUT DETECT OFF , ON
Turns the auto input detect function on/off.
When this is “ON,” input is automatically detected, and the video is switched when input from
the final output video is interrupted.
TEST PATTERN Specifies the test pattern.
PATTERN
OFF , 75% COLOR BAR,
100% COLOR BAR, RAMP,
STEP, HATCH
Selects the test pattern to display.
MOTION DISABLE , SLOW, FAST Specifies the scroll speed of the test pattern.
TEST TONE Specifies the test tone.
LEVEL OFF , -20– -10–0dB Adjusts the test tone volume.
FREQUENCY L 500Hz– 1kHz –2kHz Specifies the frequency of the test tone for the L-channel.
FREQUENCY R 500Hz– 1kHz –2kHz Specifies the frequency of the test tone for the R-channel.
VIDEO FADER CALIBRATE ENTER
Displays the VIDEO FADER SET screen.
Following the instructions on the screen, calibrate (adjust) the video fader.
In some cases, because of continued use or transport, the video output might not reach
100% even if you flip the video fader all the way upward or downward. Execute video fader
calibration in this case as well.
FACTORY RESET EXEC Returns the unit to its factory defaults.
VERSION — Displays the version of the system program.