Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 67)

67
Other Functions
Recalling a Preset
This shows you how to recall the presets registered in your camera. You can also recall presets from multiple cameras at the same time.
1 . [MENU] button
Ó
“CAMERA CONTROL”
Ó
select the
menu item shown below, and press the [VALUE] knob.
Recalling presets from a single camera
Menu item Explanation
CAMERA ID
Select the camera from which you want to
recall a preset.
ALL CAMERAS RECALL Choose “OFF.”
Recalling from all cameras simultaneously
Menu item Explanation
ALL CAMERAS RECALL Choose “ON.”
2 . Use the [VALUE] knob to change the value of the setting,
and press the [VALUE] knob.
3 . Use the [VALUE] knob to select “CAMERA PRESET RECALL,”
and press the [VALUE] knob.
4 . Use the [VALUE] knob to select the preset number
(PRESET 1–10) that you want to recall, and press the
[VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 . Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The settings are recalled from the cameras. When the operation is
finished, the message “COMPLETE” appears.
6 . Press the [MENU] button to close the menu.
Recalling presets with the buttons
By assigning a USER button to the camera control function, you can
recall presets using the button.
In this example, we’ll explain how to use the USER [4] button to recall
presets.
* The camera control function is assigned to the USER [4] button by
factory default.
1 . From the [MENU] button
Ó
“CAMERA CONTROL,” set “ALL
CAMERAS RECALL” to “ON” (all cameras) or “OFF” (single
camera only).
2 . Following the steps in “Assigning Functions to the USER
Buttons” (p. 65), assign the “CAMERA CONTROL” function
to the USER [4] button.
3 . Press the USER [4] button to turn the camera control
function on (lit).
When ALL CAMERAS RECALL = OFF
Lit purple
4 . If this is set to “OFF” in step 1, change the value to “CAMERA
ID” with the [VALUE] knob, and select the camera (1–16)
from which to recall the presets.
5 . Press the CAMERA PRESET button for the preset number
whose setting you want to recall.
The settings are recalled from the cameras.
6 . To turn the camera control function off, press the USER [4]
button once again.