Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 77)

Menu List
77
3: VIDEO OUTPUT
Menu item Value (bold text: default value) Explanation
HDMI OUT 1–3 Adjusts the video that is output from the HDMI OUT 1–3 connectors.
OUTPUT STATUS —
Shows the format and an HDCP signal presence. If there is no connection, “NOT CONNECTED”
is shown.
COLOR SPACE
YPbPr (4: 4: 4) , YPbPr (4: 2: 2),
RGB (0–255), RGB (16–235)
Specifies the color space.
DVI-D/HDMI SIGNAL HDMI , DVI-D Specifies the type of output signal.
BRIGHTNESS -64– 0 –63 Adjusts the brightness.
CONTRAST -64– 0 –63 Adjusts the contrast.
SATURATION -64– 0 –63 Adjusts the saturation.
RED -64– 0 –63 Adjusts the red level.
GREEN -64– 0 –63 Adjusts the green level.
BLUE -64– 0 –63 Adjusts the blue level.
REC CONTROL OFF, ON
Turns the REC control on/off. When this is “ON,” REC START/STOP commands can be sent to a
recorder that supports REC control functionality.
To use the REC control function, the REC START/STOP functions must be assigned to the
USER button. From the SYSTEM menu
Ó
“USER SW ASSIGN”
Ó
“USER 1 SW”–”USER 4 SW,” set
“CATEGORY” to “REC CONTROL.”
SDI OUT 1–3 Adjusts the video that is output from the SDI OUT 1–3 connectors.
OUTPUT STATUS —
Shows the format.
* When “HDCP” in the SYSTEM menu is “ON,” “HDCP MASKED” is displayed, and video/audio is
not outputted from the SDI OUT connectors.
3G-SDI MAPPING LEVEL-A, LEVEL-B Specifies the mapping structure of the 3G-SDI output.
BRIGHTNESS -64– 0 –63 Adjusts the brightness.
CONTRAST -64– 0 –63 Adjusts the contrast.
SATURATION -64– 0 –63 Adjusts the saturation.
USB OUT
Adjusts the video that is output from the USB STREAM port.
* You can edit the USB output video format and compression method from the livestreaming app or other app used at the
output destination.
OUTPUT STATUS —
Indicates whether the connection uses USB 2.0 (HIGH SPEED) or USB 3.0 (SUPER SPEED). If not
connected to a computer, this indicates “NOT CONNECTED.”
* When “HDCP” in the SYSTEM menu is “ON,” “HDCP MASKED” is displayed, and video/audio is
not outputted from the USB STREAM port.
CONNECTION RESET EXEC
Reconnects the computer and the V-160HD when the video is garbled or when operation is
otherwise unstable.
4: TRANSITION TIME
Menu item Value (bold text: default value) Explanation
MIX/WIPE TIME 0.0– 1 .0 –4.0sec Specifies the video transition time.
PinP & KEY 1– 4 TIME 0.0– 1 .0 –4.0sec For PinP compositing, specifies the fade-in/out time for the inset screen.
DSK 1, 2 TIME 0.0– 1 .0 –4.0sec For DSK compositing, specifies the fade-in/out time for the overlay caption or video.
OUTPUT FADE TIME 0.0– 1 .0 –4.0sec
Sets the time it takes for the video and audio to fade in/out when you press the [OUTPUT FADE]
button.