Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 73)

73
Other Functions
Preventing Unintended Operation
(Panel Lock)
You can disable operation of the panel’s buttons and knobs to
prevent unintended operations (Panel Lock function).
1 . [MENU] button
Ó
“SYSTEM”
Ó
select “PANEL LOCK,” and
press the [VALUE] knob.
The PANEL LOCK menu appears.
2 . Use the [VALUE] knob to select a target for panel lock,
and press the [VALUE] knob.
Menu item Explanation
ALL SW & VOLUME
The following settings are turned on/off
together.
PGM/A 1–10 SW PGM/A cross-point [1]–[10] buttons
PST/B 1–10 SW PST/B cross-point [1]–[10] buttons
INPUT ASSIGN SW [INPUT ASSIGN] button
CUT SW [CUT] button
AUTO SW [AUTO] button
MODE SW [MODE] button
AUX SW AUX [1]–[10] buttons
MEMORY SW MEMORY [1]–[10] buttons
MACRO SW MACRO [1]–[10] buttons
TRANSITION SW [TRANSITION] button
VIDEO FADER Video fader
SPLIT BLOCK
[SPLIT 1] [SPLIT 2] buttons
[PGM/A-CENTER] [PST/B-CENTER] knobs
SEQUENCER BLOCK Buttons in the SEQUENCER section
PinP & KEY 1–4 BLOCK
Buttons and knobs in the PinP & KEY
sections
DSK 1, 2 BLOCK Buttons and knobs in the DSK sections
MONITOR 1–4 SW MONITOR [1]–[4] buttons
OUTPUT FADE SW [OUTPUT FADE] button
CAPTURE IMAGE SW [CAPTURE IMAGE] button
USER 1–4 SW USER [1]–[4] buttons
AUDIO IN 1–3/4 VOLUME AUDIO INPUT LEVEL [1] [2] [3/4] knob
AUTO MIXING SW [AUTO MIXING] button
AUX VOLUME [AUX] knob
USB STREAM VOLUME [USB STREAM] knob
MASTER OUTPUT VOLUME [MASTER OUTPUT] knob
3 . Use the [VALUE] knob to specify whether panel lock is
enable (ON) or disable (OFF), and press the [VALUE] knob.
4 . Press the [MENU] button to close the menu.
MEMO
The [MENU] button blinks when you try to operate a locked
button, knob or other control.
Returning to the Factory Settings
(Factory Reset)
Here’s how you can return the settings of the V-160HD to their
factory-set state.
If following the procedures described in this manual does not cause
the result you expect, try executing a factory reset.
NOTE
¹ When you execute a factory reset, all the settings you’ve made
as well as the data saved on the V-160HD (preset memory,
macros, sequencer, and still images) is lost.
¹ Do not turn off the power while the message “PLEASE WAIT”
is shown.
1 . [MENU] button
Ó
“SYSTEM”
Ó
select “FACTORY RESET,”
and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 . Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
Factory reset is executed. When the operation is finished, the
message “COMPLETE” appears.
3 . Press the [MENU] button to close the menu.