Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 95)

Menu List
95
19: CTL/EXP
Menu item Value (bold text: default value) Explanation
CTL/EXP 1, 2 These settings for the footswitch or expression pedal connected to the CTL/EXP 1, 2 jacks.
CTL/EXP TYPE
Settings for the devices (footswitch or expression pedal) connected to the CTL/EXP 1, 2 jacks.
OFF Disables the CTL/EXP jack.
CTL A & CTL B Choose this if a footswitch is connected.
EXP Choose this if an expression pedal is connected.
When CTL/EXP TYPE = CTL A & CTL B
ASSIGN Specifies the functions that are assigned to CTL A and CTL B of the footswitch.
CTL A
CTL B CATEGORY VALUE Explanation
N/A --- No function is assigned.
PGM CH SELECT INPUT 1–10 Switches the PGM/A cross-point buttons.
PST CH SELECT INPUT 1–10 Switches the PST/B cross-point buttons.
AUX CH SELECT INPUT 1–10 Switches the video sent to the AUX bus.
INPUT 1–10 ASSIGN HDMI 1–8, SDI 1–8, STILL 1–16 Changes the video assigned to INPUT 1–10.
STILL OUTPUT STILL 1–16
Pauses the normal output, and previews or final outputs a cut of the still
image. Press the footswitch again to return to normal output.
PinP & KEY 1–4 SOURCE HDMI 1–8, SDI 1–8, STILL 1–16 Switches the video source of the inset screen.
DSK 1, 2 SOURCE HDMI 1–8, SDI 1–8, STILL 1–16 Switches the DSK video source.
SW CONTROL
CUT SW, AUTO SW
TRANSITION SW, MODE SW
SPLIT 1 SW, SPLIT 2 SW
PinP & KEY 1–4 PVW SW
PinP & KEY 1–4 PGM SW
DSK 1, 2 PVW SW
DSK 1, 2 PGM SW
AUTO MIXING SW
OUTPUT FADE SW
USER 1–4 SW
This works the same as when you press the button selected in “VALUE.”
TAKE
Ç AUTO TAKE É Automatically switches the PGM/A bus and PST/B bus videos.
Ç CUT É Switches the video between PGM/A bus and PST/B bus as a cut.
AUDIO INPUT MUTE
AUDIO IN 1–3/4, USB IN,
Bluetooth IN, HDMI 1–8, SDI 1–8 Turns the mute function on/off for the input audio.
AUDIO OUTPUT MUTE MASTER OUTPUT, AUX, USB OUT Turns the mute function on/off for the output audio.
AUDIO INPUT SOLO
AUDIO IN 1–3/4, USB IN,
Bluetooth IN, HDMI 1–8, SDI 1–8 Turns the solo function on/off for the input audio.
VOICE CHANGER SW AUDIO IN 1, 2 Turns the voice changer on/off.
REVERB (MOMENTARY) --- Reverb turns on only while you press the footswitch.
REVERB (ALTERNATE) --- Turns reverb on/off.
OUTPUT FADE --- The final output video fades out to a black screen.
LOAD MEMORY MEMORY 1–30 Recalls a preset memory.
INPUT SCAN
NORMAL
Each time you press the footswitch, the final output switches from INPUT
1–10 in sequential order.
REVERSE
Each time you press the footswitch, the final output switches from INPUT
1–10 in reverse order.
MEMORY SCAN
NORMAL
Each time you press the footswitch, preset memories 1–30 are recalled in
sequential order.
REVERSE
Each time you press the footswitch, preset memories are recalled in
reverse order from 30 through 1.
MACRO EXECUTE MACRO 1–100 Executes a macro (a series of recorded operations).
SEQUENCER
MODE ON/OFF, NEXT, PREVIOUS,
AUTO SEQUENCE
When the sequencer function is on, this works the same as when you press
the button selected in “VALUE.”
GPO (ONE SHOT) GPO 1–16 Outputs a control signal for 0.5 seconds.
GPO (ALTERNATE) GPO 1–16 The control signal output is switched on/off with each press of the footswitch.