Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 64)

64
Other Functions
Restoring
Here’s how to restore this unit’s settings that you saved on a USB flash
drive. When you restore settings, the current settings are overwritten.
1 . [MENU] button
Ó
“ USB MEMORY ”
Ó
select “ RESTORE ALL
SETTINGS, ” and press the [VALUE] knob.
The settings files in the USB flash drive are listed.
2 . Use the [VALUE] knob to select the file you want to
restore, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The settings are restored. When the operation is finished, the
message “COMPLETE” appears.
4 . Press the [MENU] button to close the menu.
Formatting a USB Flash Drive
The first time that you use a USB flash drive, you must use the V-160HD
to format it.
NOTE
¹ A USB flash drive that was not formatted by the V-160HD will
not be recognized.
¹ Never turn off the power or remove the USB flash drive while
the message “PLEASE WAIT” is shown.
¹ When you format a USB flash drive, all data on that USB flash
drive is erased. If the drive contains important data, back it up
to your computer before you format the drive.
1 . Connect the USB flash drive to the USB MEMORY port.
* Ensure that the USB flash drive is oriented
correctly, and insert it all the way into the port.
Do not use excessive force.
Front panel
2 . [MENU] button
Ó
“USB MEMORY”
Ó
select “FORMAT,”
and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
Formatting is executed. When the operation is finished, the
message “COMPLETE” appears.
4 . Press the [MENU] button to close the menu.