Compositing a still image with alpha channel, Y (p. 35), Setting the dsk mode or a still image to composite – Roland V-160HD SDI/HDMI Streaming Video Switcher User Manual

Page 35: Compositing using dsk, Video composition operations

Advertising
background image

35

Video Composition Operations

Compositing a Still Image with Alpha Channel

Use alpha channels (areas which contain transparency data) to cut out still images and place them against different background video as a

composite.

Alpha channel

Background video

Still image

Setting the DSK mode or a still image to composite

1 .

[MENU] button

Ó

“DSK”

Ó

“DSK 1” or “DSK 2

Ó

select

“DSK MODE” or “DSK SOURCE,” and press the [VALUE] knob.

2 .

Use the [VALUE] knob to change the setting as shown

below.

Menu item

Setting

DSK MODE

ALPHA KEY

DSK SOURCE

Specifies the still image with alpha channel.

3 .

Press the [MENU] button to quit the menu.

MEMO

You can also select the still images assigned to INPUT 1–10 as a

DSK video source with the buttons.
Press the DSK 1 or DSK 2 [SOURCE] button to turn it on (the button

lights), and then select using the DSK SOURCE [1]–[10] buttons.

Compositing using DSK

In this example, we explain how to composite a still image using “DSK 1.”
The operation is the same when using “DSK 2.”

1 .

Press the DSK 1 [SOURCE] button to turn it on (the button

lights up).

2 .

Press the DSK 1 [PVW] button to turn on the preview

output (lit).

A preview of the composition results is displayed in the PVW

section of the multi-view.
At this stage, the final output has not yet been changed.

3 .

Press the DSK 1 [PGM] button to turn on DSK compositing

(lit).

The composition results is sent to final output.

4 .

To turn off DSK compositing, press the DSK 1 [PGM]

button once again.

MEMO

Set the fade-in/out time for the still image to superimpose from

the [MENU] button

Ó

“TRANSITION TIME”

Ó

“DSK 1 TIME” or

“DSK 2 TIME.”

Turning DSK/PinP composition on/off in tandem

with video transitions

You can make DSK/PinP composition (p. 28) turn on/off in tandem

with the video transitions.
From the [MENU] button

Ó

“SYSTEM,” set “EFFECTS TRANSITION

SYNC” to “ON.”
After step 2, use the [AUTO] and [CUT] buttons or operate the

video fader to switch the video. DSK composition turns on, and the

composited result that is previewed is sent to final output.

Advertising