Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 92)

Menu List
92
14: MACRO
Menu item Value (bold text: default value) Explanation
EXECUTE
1: DEMO 1 –
100: MACRO100 (*13)
Select a macro (a series of recorded operations) to execute.
Press the [VALUE] knob to execute the macro.
When “MACRO” is selected on the [MODE] button, you can use the MACRO [1]–[10] buttons to
execute macros 1–10.
INITIALIZE
ALL, 1: DEMO 1 –
100: MACRO100 (*13)
Selects the macro to be initialized.
Press the [VALUE] knob to initialize the macro.
LIST EDIT
1: DEMO 1 –
100: MACRO100 (*13)
Selects the macro to edit.
Press the [VALUE] knob to show the operations recorded in the macro.
Menu item Value Explanation
1: (operation name)–
10: (operation name)
—
Shows the list of operations recorded in the macro.
“----------” is shown if no operations are recorded.
Select an operation or “ADD NEW FUNCTION” and press the [VALUE] knob to
display the FUNCTION EDIT menu (shown below) for editing the operation.
PREVIEW EXEC Previews the macro.
COPY MACRO TO
1: DEMO 1–
100: MACRO100 (*13)
Specifies the macro copy source.
Press the [VALUE] knob to copy the macro.
SWAP MACRO WITH
1: DEMO 1–
100: MACRO100 (*13)
Specifies the macro swap destination.
Press the [VALUE] knob to swap the macro.
NAME EDIT
1: DEMO 1 –
100: MACRO100 (*13)
Selects the macro to be renamed.
Press the [VALUE] knob to access the screen for editing the name.
LOAD FROM USB MEMORY ENTER
Shows a list of the macro setting files (.RMF) that are on the USB flash drive.
You can select a macro setting file and load the macro (1–100) into the unit.
SAVE TO USB MEMORY ENTER
Shows a list of the macro setting files (.RMF) that are on the USB flash drive.
You can select the macro settings file used to save the macro (1–100) to the USB flash drive. If you
selected “NEW FILE...,” a new macro settings file is saved.
NUMBER OF MACRO SW
When “MACRO” is selected on the [MODE] button, this sets how many buttons function as macro selection buttons.
10 MACRO [1]–[10] buttons
30 MACRO [1]–[10] buttons, PGM/A [1]–[10] buttons, PST/B [1]–[10] buttons
SW ASSIGN
ENTER Displays the SW ASSIGN menu.
Specifies the macro assigned to each button.
Menu item Value Explanation
MACRO 1–10
1: DEMO 1–
100: MACRO100 (*13)
MACRO [1]–[10] buttons
PGM/A 1–10 (*14) PGM/A [1]–[10] buttons
PST/B 1–10 (*14) PST/B [1]–[10] buttons
(*13) If you edited a macro’s name using “NAME EDIT,” the edited name is shown.
(*14) This can be set if “NUMBER OF MACRO SW” is “30.”
FUNCTION EDIT
Menu item Value (bold text: default value) Explanation
FUNCTION
PGM TAKE
PGM/PST SELECT
AUX SELECT
INPUT ASSIGN
TRANSITION TIME
TRANSITION TYPE
PinP & KEY ON/OFF
PinP & KEY SOURCE
PinP & KEY WINDOW
DSK ON/OFF
DSK SOURCE
SPLIT ON/OFF
SPLIT TYPE
SPLIT POSITION
AUDIO INPUT LEVEL
AUDIO INPUT MUTE
AUDIO OUTPUT LEVEL
AUDIO OUTPUT MUTE
PRESET MEMORY
MACRO
OUTPUT FADE
REC CONTROL
GPO ONE SHOT
GPO ALTERNATE
CAMERA PRESET RECALL
WAIT
Sets the operation to record to the macro.
* The related menu is shown according to the operation you set.
WAIT:
Sets the waiting time before the next operation is executed.
TIMING
Sets the timing of the operation to execute.
AFTER PREVIOUS
The function is executed after the preceding one. The next sequential list
number is used.
SAME AS PREVIOUS
Executes the operation at the same time as the preceding one. The same list
number as the previous operation is used.
MOVE THIS FUNCTION ENTER Moves the operation being edited and resorts the list.
COPY THIS FUNCTION ENTER Copies the operation being edited into a position in the list you desire.
DELETE THIS FUNCTION EXEC Deletes the operation being edited.