Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 75)

75
Menu List
1: VIDEO ASSIGN
Menu item Value (bold text: default value) Explanation
INPUT 1–10
HDMI 1–8, SDI 1–8, STILL 1–16
The default values are as follows.
INPUT 1: HDMI 1
INPUT 2: HDMI 2
INPUT 3: HDMI 3
INPUT 4: HDMI 4
INPUT 5: HDMI 5
INPUT 6: HDMI 6
INPUT 7: HDMI 7
INPUT 8: HDMI 8
INPUT 9: STILL 1
INPUT 10: STILL 2
Sets the video source (input video and still images) to assign to the cross-point [1]–[10]
buttons.
HDMI OUT 1–3
Specifies the video bus that is assigned to the HDMI OUT 1–3 connectors.
* When you change the settings assigned to “HDMI OUT 3,” the display on the monitor of this unit changes as well.
PROGRAM Final output video. This is the default setting for “HDMI OUT 1.”
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video. This is the default setting for “HDMI OUT 2.”
AUX AUX bus video
MULTI-VIEW Multi-view. This is the default setting for “HDMI OUT 3.”
16 INPUT-VIEW
The input video from the HDMI IN and SDI IN connectors (shown as 16 separate sections
on the screen)
16 STILL-VIEW Still images loaded into the unit (shown as 16 separate sections on the screen)
SDI OUT 1–3
Specifies the video bus that is assigned to the SDI OUT 1–3 connectors.
PROGRAM Final output video. This is the default setting for “SDI OUT 1.”
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video. This is the default setting for “SDI OUT 2.”
AUX AUX bus video
MULTI-VIEW Multi-view. This is the default setting for “SDI OUT 3.”
16 INPUT-VIEW
The input video from the HDMI IN and SDI IN connectors (shown as 16 separate sections
on the screen)
16 STILL-VIEW Still images loaded into the unit (shown as 16 separate sections on the screen)
USB OUT
Specifies the video bus that is assigned to the USB STREAM port.
PROGRAM Final output video.
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video.
AUX AUX bus video
MULTI-VIEW Multi-view.
16 INPUT-VIEW
The input video from the HDMI IN and SDI IN connectors (shown as 16 separate sections
on the screen)
16 STILL-VIEW Still images loaded into the unit (shown as 16 separate sections on the screen)
AUX SOURCE HDMI 1 –8, SDI 1–8, STILL 1–16
Selects the video that is sent to the AUX bus.
When “AUX” is selected on the [MODE] button, you can use the AUX [1]–[10] buttons to
select the video that is sent to the AUX bus.
PROGRAM LAYER
ENTER Displays the PROGRAM LAYER menu.
Menu item Value Explanation
PinP & KEY 1–4 DISABLE, ENABLE Sets whether each layer is displayed (ENABLE) or hidden (DISABLE) in the
final output video. DSK 1, 2 DISABLE, ENABLE
SUB PROGRAM LAYER
ENTER Displays the SUB PROGRAM LAYER menu.
Menu item Value Explanation
PinP & KEY 1–4 DISABLE, ENABLE Sets whether each layer is displayed (ENABLE) or hidden (DISABLE) in the
SUB PROGRAM bus video. DSK 1, 2 DISABLE, ENABLE