Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 21)

21
Video Operations
Preset memory scan
1 . [MENU] button
Ó
“AUTO SWITCHING”
Ó
select “TYPE,”
and press the [VALUE] knob.
2 . Use the [VALUE] knob to select “PRESET MEMORY SCAN,”
and press the [VALUE] knob.
3 . Use the [VALUE] knob to select a menu item shown below,
and press the [VALUE] knob.
Menu item Explanation
SCAN SEQUENCE
Specifies the order in which preset memories
are switched.
NORMAL:
Switches in the order of preset memory 1
Ó
30.
REVERSE:
Switches in the order of preset memory 30
Ó
1.
RANDOM:
Switches randomly.
MEMORY 1–30 TIME
Specifies the time it takes to switch to the next
preset memory. Turn this “OFF” to skip.
4 . Use the [VALUE] knob to change the value of the setting.
5 . Press the [MENU] button to close the menu.
BPM sync
1 . [MENU] button
Ó
“AUTO SWITCHING”
Ó
select “TYPE,”
and press the [VALUE] knob.
2 . Use the [VALUE] knob to select “BPM SYNC,” and press the
[VALUE] knob.
3 . Use the [VALUE] knob to select a menu item shown below,
and press the [VALUE] knob.
Menu item Explanation
BPM Specifies the BPM.
MODE
Specifies how the video is switched.
TRANSITION:
The video switches using the currently selected
transition effect (mix or wipe).
CUT:
The video switches as a cut.
SPEED
Specifies the video switching speed as a multiple of
the specified BPM.
4 . Use the [VALUE] knob to change the value of the setting.
5 . Press the [MENU] button to close the menu.
MEMO
By assigning the “BPM TAP” function for auto-switching to a USER
button (p. 65), you can set the BPM according to the tempo at
which you press the button.
The USER buttons blink in sync with the current BPM setting.