Sony LHP-1 Lens Hood - Manual (Page 111)

111 6. Saving and Loading User Configuration Data
User Configuration Data
You can save/load full menu settings in
internal memory and on SD cards. This allows
you to quickly recall an appropriate set of
menu settings for the current situation.
To save configuration data on an SD card,
insert a writable SD card (page 34) into the
SD card slot (page 13) before proceeding.
For details about the settings saved in each
file, see “Items Saved in Files” (page 139).
All Files
All-settings files are used to save/load the
configuration data of all menus.
You can save up to 64 files on an SD card.
[Note]
Device specific data (shading, output levels, and other
data that requires adjustment for the specific device) is
not saved.
Scene Files
Scene files are used to save/load adjustments
to paint items for the purpose of shooting a
particular scene. You can save up to five files
in internal memory and up to 64 files on an SD
card.
Settings can be saved or loaded when
Technical > Special Configuration > RM/RCP
Paint Control (page 91) is set to On in the
full menu.
Scene files allow you to save the following
types of data.
• Values set in the Paint menu
• Shutter, ND filter, Gain, Base ISO, Input Color
Space, and NR settings
• White balance data
User Gamma Files
You can save up to five user-defined user
gamma files in internal memory.
Can be saved when Technical > Special
Configuration > RM/RCP Paint Control
(page 91) is set to On in the full menu.