Sony LHP-1 Lens Hood - Manual (Page 85)

85 3. Camera Operations
Paint Menu
The functions and available settings of each menu item are given below.
[Note]
Technical > Special Configuration > RM/RCP Paint Control (page 91) must be set to On in the full menu to enable
the setting of Paint menu items.
Default values are shown underlined and in bold text.
Paint > Black
Makes settings related to black level.
Menu item Setting Description
Master Black –99 to ±0 to +99 Sets the master black level.
R Black –99 to ±0 to +99 Sets the R black level.
B Black –99 to ±0 to +99 Sets the B black level.
Paint > Flare
Makes settings related to flare correction.
Menu item Setting Description
Setting On/ Off Turns the flare correction function on/off.
Master Flare –99 to ±0 to +99 Sets the master flare user adjustment of the
flare correction required by the unit.
R Flare –99 to ±0 to +99 Sets the R flare user adjustment of the flare
correction required by the unit.
G Flare –99 to ±0 to +99 Sets the G flare user adjustment of the flare
correction required by the unit.
B Flare –99 to ±0 to +99 Sets the B flare user adjustment of the flare
correction required by the unit.
Paint > Gamma
Makes settings related to gamma correction.
Menu item Setting Description
Setting On /Off Turns the gamma correction function on/off.
Gamma Category S-Log3/HLG(Natural)/
HLG(Live)/User The gamma category setting is display only,
because it is determined by the Project >
Basic Setting > Input Color Space (page 72)
setting in the full menu.
Paint > Gamma
Makes settings related to gamma correction.
Menu item Setting Description
Gamma Select When Gamma Category is set
to S-Log3:
S-Log3
When Gamma Category is set
to HLG(Natural):
HLG(Natural)
When Gamma Category is set
to HLG(Live):
HLG(Live)
When Gamma Category is set
to User:
User 1 /User 2/User 3/
User 4/User 5
Selects the gamma table used for gamma
correction.
Paint > Black Gamma
Makes settings related to black gamma correction.
[Note]
Black Gamma is grayed out and cannot be operated when Project > Basic Setting > Input Color Space (page 72) is
set to S-Gamut3.Cine/SLog3 or S-Gamut3/SLog3 in the full menu.
Menu item Setting Description
Setting On/ Off Turns the black gamma correction function
on/off.
Range Low/L.Mid/ H.Mid Selects the effective range of black gamma
correction.
Low: 0% to 3.6%
L.Mid: 0% to 7.2%
H.Mid: 0% to 14.4%
Master Black Gamma –99 to ±0 to +99 Sets the master black gamma level.
Paint > Knee
Makes settings related to knee correction.
[Note]
Knee is grayed out and cannot be operated when Project > Basic Setting > Input Color Space (page 72) is set to
S-Gamut3.Cine/SLog3 or S-Gamut3/SLog3 in the full menu.
Menu item Setting Description
Setting On/ Off Turns the knee correction function on/off.
Point –99 to ±0 to +99 Sets the knee point.
Slope –99 to ±0 to +99 Sets the knee slope.