Sony LHP-1 Lens Hood - Manual (Page 82)

3. Camera Operations: Monitoring Menu 82
Monitoring > User Frame Line 1
Makes settings related to user frame line 1.
Menu item Setting Description
Preset Aspect Ratio 17:9/ 16:9 /15:9/14:9/13:9/
9:16/4:3/1:1/1.43:1/1.66:1/
1.85:1/2:1/2.35:1/2.39:1/
1.90:1 (W34)*
* Frame line with the same
horizontal picture size as when
1.43:1 is set. In 6K 3:2 mode,
the horizontal picture size is
approximately 34 mm.
Selects the mode when displaying a fixed
aspect ratio.
[Note]
Configurable only when Select is set to Preset.
Scaling 1% to 100% /--- Sets the scale factor for a fixed aspect ratio.
[Notes]
• Configurable only when Select is set to Preset.
• “---” is displayed when Preset Aspect Ratio is set
to 1.90:1 (W34), and configuration is not possible.
Preset Aspect Ratio
Type Line /Mask/Line&Mask Selects the display form for a fixed aspect
ratio.
Line: Displays using lines.
Mask: Displays a lower video signal level for
areas outside the marker area.
Line&Mask: Displays lines and a lower video
signal level for areas outside the marker
area.
[Note]
Configurable only when Select is set to Preset.
Aspect Ratio(Pixels) Aspect ratio (number of pixels,
anamorphic ratio) Displays the aspect ratio of user frame line 1,
number of pixels, and anamorphic ratio for
the effective picture size.
[Note]
The number of pixels is the value for the effective
picture size before anamorphic de-squeeze
conversion.
Width 3 to 480 ( 240 ) Sets the user frame line 1 width (distance from
the center to the left and right edges).
[Note]
Configurable only when Select is set to Variable.
Height 3 to 270 ( 135 ) Sets the user frame line 1 height (distance
from the center to the top and bottom edges).
[Note]
Configurable only when Select is set to Variable.
Monitoring > User Frame Line 1
Makes settings related to user frame line 1.
Menu item Setting Description
H Position Max. –477 to 477 ( ±0 ) Sets the horizontal position of the center of
user frame line 1.
The setting range becomes narrower as the
Width setting increases above 3.
[Note]
Configurable only when Select is set to Variable.
V Position Max. –267 to 267 ( ±0 ) Sets the vertical position of the center of user
frame line 1.
The setting range becomes narrower as the
Height setting increases above 3.
[Note]
Configurable only when Select is set to Variable.
Variable Aspect Type Line Displays the type of the user frame line 1
display.
[Note]
Displayed only when Select is set to Variable.
Monitoring > User Frame Line 2
Makes settings related to user frame line 2.
Menu item Setting Description
Select Preset/ Variable Selects whether to display user frame line 2 or
fixed aspect ratio.
Preset: Displays the aspect ratio set by Preset
Aspect Ratio, Scaling, and Preset Aspect
Ratio Type.
Variable: Displays an arbitrary rectangular
frame set by Width, Height, H Position, V
Position, and Variable Aspect Type.
Preset Aspect Ratio 17:9/ 16:9 /15:9/14:9/13:9/
9:16/4:3/1:1/1.43:1/1.66:1/
1.85:1/2:1/2.35:1/2.39:1/
1.90:1 (W34)*
* Frame line with the same
horizontal picture size as when
1.43:1 is set. In 6K 3:2 mode,
the horizontal picture size is
approximately 34 mm.
Selects the mode when displaying a fixed
aspect ratio.
[Note]
Configurable only when Select is set to Preset.