Sony LHP-1 Lens Hood User Manual
Page 119
7. Connecting External Devices: Connecting a Remote Control Unit
119
Item
Sub-item
Sub-item
Selection option
RCP-1001
RCP-1501/3501
RCP-3100
RM-B170
RM-B750
Prev.
–
–
–
–
–
–
Yes
–
White Mode
2)
Preset ON/OFF
–
On/Off
–
–
–
Yes
Yes
Iris
Iris Level
–
(Control range of target lens)
Yes
Yes
Yes
Yes
Yes
Close
–
On/Off
Yes
Yes
Yes
–
Yes
Zoom
11)
Remote
–
On/Off
–
Yes
1)
Yes
1)
Yes
1)
–
Speed
–
–
–
–
–
–
–
Tele to Wide
–
–
–
Yes
1)
Yes
1)
Yes
1)
–
Zoom Value[%]
–
–
–
Yes
1)
Yes
1)
Yes
1)
–
Focal Length[mm]
–
–
–
Yes
1)
Yes
1)
Yes
1)
–
Focus
11)
Remote
–
On/Off
–
Yes
1)
Yes
1)
Yes
1)
–
Focus Position
–
–
–
Yes
1)
Yes
1)
Yes
1)
–
Focus Value[%]
–
–
–
Yes
1)
Yes
1)
Yes
1)
–
Focus Length[m]
–
–
–
Yes
1)
Yes
1)
Yes
1)
–
Call
–
–
–
Yes
Yes
Yes
Yes
Yes
1) Controllable when assigned to operation block of controller.
2) Controllable only when Technical > Special Configuration > RM/RCP Paint Control (page 91) is set to On in the full menu.
3) Since Color Temp is clipped at 2000K and 15000K during R/B Gain operation, it may not be possible to display the correct Color Temp value for the R/B Gain value.
4) Since Color Temp Balance is clipped at ±99, it may not be possible to display the correct Color Temp Balance value for the R/B Gain value.
5) Scene files 1 to 5 can be selected or deselected only after they have been loaded into the unit.
6) Allows you to restore the settings of the unit to standard state from the controller without any scene files loaded.
7) Configurable only when Project > Basic Setting > Input Color Space (page 72) is set to HLG(Natural), HLG(Live), Rec.2020/User Gamma, or Rec.709/User Gamma in the full menu.
8) The test signal cannot be switched on/of during auto white balance execution.
9) May not be displayed depending on the controller model and version.
10) The normal Knee function of the unit controls the high-luminance knee equivalent of HDR Knee.
11) The zoom and focus drive instructions from a remote control unit are disabled when an E-mount lens is attached.