Sony LHP-1 Lens Hood - Manual (Page 86)

3. Camera Operations: Paint Menu 86
Paint > White Clip
Makes settings related to white clip adjustment.
[Note]
White Clip is grayed out and cannot be operated when Project > Basic Setting > Input Color Space (page 72) is set
to S-Gamut3.Cine/SLog3 or S-Gamut3/SLog3 in the full menu.
Menu item Setting Description
Setting On/ Off Turns the white clip adjustment function on/
off.
Level 60.0% to 108.0% to 109.0% Sets the white clip level.
Paint > Detail
Makes settings related to detail adjustment.
Menu item Setting Description
Setting On /Off Turns the detail adjustment function on/off.
Level –99 to ±0 to +99 Sets the detail level.
H/V Ratio –99 to ±0 to +99 Sets the mix ratio of the H detail level and V
detail level.
Crispening –99 to ±0 to +99 Sets the crispening level.
Level Depend On /Off Turns the level dependence adjustment
function on/off.
Level Depend Level –99 to ±0 to +99 Sets the level dependence level.
Frequency –99 to ±0 to +99 Sets the center frequency of the H detail
signal (larger values give finer detail).
Knee Aperture On/ Off Turns the knee aperture correction function
on/off.
Knee Aperture Level –99 to ±0 to +99 Sets the knee aperture level.
Limit –99 to ±0 to +99 Sets the detail limiter for both the white side
and black side.
White Limit –99 to ±0 to +99 Sets the detail limiter for the white side.
Black Limit –99 to ±0 to +99 Sets the detail limiter for the black side.
Paint > Matrix
Makes settings related to matrix correction.
Menu item Setting Description
Setting On/ Off Turns the matrix correction function on/off.
User Matrix On/ Off Turns the user matrix correction function on/
off.
User Matrix R-G –99 to ±0 to +99 Sets matrix coefficients individually for fine
adjustment of the color of the whole image.
User Matrix R-B –99 to ±0 to +99
User Matrix G-R –99 to ±0 to +99
User Matrix G-B –99 to ±0 to +99
User Matrix B-R –99 to ±0 to +99
User Matrix B-G –99 to ±0 to +99
Paint > Multi Matrix
Makes settings related to multi matrix correction.
[Note]
Multi Matrix is grayed out and cannot be operated when Matrix is set to Off.
Menu item Setting Description
Setting On/ Off Turns multi-matrix correction function on/off
for setting the saturation in 16-axis hue space.
Area Indication On/ Off Turns the display of a zebra pattern in the
color area of the screen targeted for multi
matrix correction on/off.
Reset Run/Cancel Sets all [Hue] and [Saturation] values on each
axis to default values (execute by selecting
Run).
Axis B /B+/MG–/MG/MG+/R/R+/
YL–/YL/YL+/G–/G/G+/CY/
CY+/B–
Sets the color targeted for multi matrix
correction (16-axis mode)
Hue –99 to ±0 to +99 Sets the hue of the color targeted for multi
matrix correction for each of the 16 axes.
Saturation –99 to ±0 to +99 Sets the saturation of the color targeted for
multi matrix correction for each of the 16 axes.