Honeywell ST 3000 - Manual (Page 33)

Section 4 —Installation
4.1 Mounting ST 3000 Transmitter
Summary You can mount all transmitter models (except flush mount models and
those with integral flanges) to a 2-inch (50 millimeter) vertical or
horizontal pipe using our optional angle or flat mounting bracket, or a
bracket of your own. Flush mount models are mounted directly to the
process pipe or tank by a 1-inch weld nipple. Those models with integral
flanges are supported by the flange connection.
Figure 5 shows typical bracket mounted and flange mounted transmitter
installations for comparison.
Figure 5 Typical Bracket Mounted and Flange Mounted Installations
Angle
Mounting
Bracket
Flat
Mounting
Bracket
Horizontal Pipe
24118
Tank
Wall
Flange
Connection
Transmitter
Flange
Continued on next page
2/05 ST 3000 Release 300 Installation Guide 23