Honeywell UMC800 - Manual (Page 103)

Specifications
I/O Module Configuration
Release F UMC800 Controller Installation and User Guide 95
4/01
Component Parameter Description
Inputs per Module 6 (ID 3) or 16 (ID B) dry
contact Logic Inputs
(Module ID 3 and B)
Switching Voltage 5 Vdc
Switching Current 5 mA
Digital Outputs AC Outputs
(Module ID 8)
DC Outputs
(Module ID 7)
Outputs per Module 6 6 (current sinking)
Operating Voltage 15 Vac to 240 Vac 10.2 Vdc to 26.4 Vdc
Output Type SSR (Triac) NPN open collector
Peak Voltage 264 Vac 40 Vdc
AC Frequency 47 Hz to 63 Hz N/A
ON Voltage Drop <1.5 Vac (>0.1A)
<3.0 Vac (<0.1A) 1.5 Vdc maximum
Maximum Load
Current 0.5 A per point or
2 outputs at 2.0 A and
4 outputs at 0.5 A 0.3 A per point
Maximum Leakage
Current 4 mA (240 Vac, 60 Hz)
1.2 mA (100 Vac, 60 Hz)
0.9 mA (100 Vac, 50 Hz) 0.1 mA @ 40 Vdc
Maximum Inrush
Current 10 A for 10 ms 1 A for 10 ms
Minimum Load 10 mA 0.5 mA
Base Power required * 20 mA / ON pt. 250 mA
maximum 100 mA maximum
5 V
OFF to ON Response 1 ms 1 ms
ON to OFF response 1 ms +1/2 cycle 1 ms
Fuses
5 x 20mm 1 per output, 1.5 A slow blow 1 per output
1 A fast blow