Honeywell UMC800 - Manual (Page 86)

Maintenance
Replacement Procedures
78 UMC800 Controller Installation and User Guide Release F
4/01
Step Action
18 Reconnect power wiring to proper terminals on power supply as shown.
Hot
Neutral
Ground
F 3,15 AT
250V
L1
L2 / N
19 Replace front cover and secure with two screws.
20 Restore power to controller.
21 Verify configuration.
Perform calibration of AI modules and CJC references (if using T/C) for all channels if greater
than 0.1 % accuracy is required.