Figure 15-8 mvr port configuration -18 – SMC Networks SMC TigerAccess SMC7824M/FSW User Manual
Page 334

M
ULTICAST
F
ILTERING
15-18
- Non-MVR – An interface that does not participate in the MVR
VLAN. (This is the default type.)
• Immediate Leave – Configures the switch to immediately remove an
interface from a multicast stream as soon as it receives a leave message
for that group.
• Trunk
21
– Shows if port is a trunk member.
Web – Click MVR, Port Configuration or Trunk Configuration.
Figure 15-8 MVR Port Configuration
CLI – This example configures an MVR source port and receiver port, and
then enables immediate leave on the receiver port.
21. Port Information only.
Console(config)#interface ethernet 1/1
Console(config-if)#mvr type source
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#mvr type receiver
Console(config-if)#mvr immediate
Console(config-if)#