SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 384)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
19-14
Command Usage
• Gigabit Ethernet ports are not affected by the system mtu FE-size
command. Fast Ethernet ports are not affected by the system mtu
jumbo command.
• After setting the jumbo frame size with the system mtu or system
mtu jumbo command, remember to use the jumbo frame command
(page 19-12) to implement the new setting by enabling jumbo frames.
Example
Related Commands
jumbo frame (19-12)
show system mtu (19-14)
show system mtu
This command shows the maximum transfer unit size for Fast Ethernet
and Gigabit Ethernet ports.
Command Mode
Global Configuration
Example
File Management Commands
Managing Firmware
Firmware can be uploaded and downloaded to or from a TFTP server. By
saving runtime code to a file on a TFTP server, that file can later be
downloaded to the switch to restore operation. The switch can also be set
to use new firmware without overwriting the previous version.
Console(config)#system mtu 1528
Console(config)#
Console#show system mtu
System MTU size is 1500 bytes
System Jumbo MTU size is 1500 bytes
Console#