SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 679)

33-1
C
HAPTER
33
M
ULTICAST
F
ILTERING
C
OMMANDS
This switch uses IGMP (Internet Group Management Protocol) to query
for any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data
out to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to
receive the multicast service.
Table 33-1 Multicast Filtering Commands
Command Groups Function Page
IGMP Snooping Configures multicast groups via IGMP snooping
or static assignment, sets the IGMP version,
displays current snooping and query settings, and
displays the multicast service and group members 33-2
IGMP Query Configures IGMP query parameters for multicast
filtering 33-9
Static Multicast
Routing Configures static multicast router ports 33-13
Multicast VLAN
Registration Configures a single network-wide multicast
VLAN shared by hosts residing in other standard
or private VLAN groups, preserving security and
data isolation for normal traffic 33-15