SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 528)

A
CCESS
C
ONTROL
L
IST
C
OMMANDS
23-14
Command Mode
Privileged Exec
Example
Related Commands
mask (IP ACL) (23-9)
ip access-group
This command binds a port to an IP ACL. Use the no form to remove the
port.
Syntax
[no] ip access-group acl_name in
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• in – Indicates that this list applies to ingress packets.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• A port can only be bound to one ACL.
• If a port is already bound to an ACL and you bind it to a different
ACL, the switch will replace the old binding with the new one.
• You must configure a mask for an ACL rule before you can bind it to
a port.
Example
Console#show access-list ip mask-precedence
IP ingress mask ACL:
mask host any
mask 255.255.255.0 any
Console#
Console(config)#int eth 1/2
Console(config-if)#ip access-group standard david in
Console(config-if)#