SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 618)

VLAN C
OMMANDS
30-2
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Table 30-2 GVRP and Bridge Extension Commands
Command Function Mode Page
bridge-ext gvrp Enables GVRP globally for the
switch GC 30-2
show bridge-ext Shows the global bridge extension
configuration PE 30-3
switchport gvrp Enables GVRP for an interface IC 30-4
switchport forbidden vlan Configures forbidden VLANs for
an interface
IC 30-15
show gvrp configuration Displays GVRP configuration for
the selected interface NE,
PE 30-4
garp timer Sets the GARP timer for the
selected function IC 30-5
show garp timer Shows the GARP timer for the
selected function NE,
PE 30-6