SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 685)

IGMP S
NOOPING
C
OMMANDS
33-7
• This command is only effective if IGMP snooping is enabled, and
IGMPv2 or IGMPv3 snooping is used.
Example
The following shows how to enable immediate leave.
show ip igmp snooping
This command shows the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Configuring IGMP Snooping and Query Parameters” on
page 15-4 for a description of the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console(config)#interface vlan 1
Console(config-if)#ip igmp snooping immediate-leave
Console(config-if)#
Console#show ip igmp snooping
Service status: Enabled
Querier status: Disabled
Leave proxy status: Enabled
Query count: 2
Query interval: 125 sec
Query max response time: 10 sec
Router port expire time: 300 sec
Immediate Leave Processing: Enabled on VLAN 1,
IGMP snooping version: Version 2
Console#