SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 648)

C
LASS OF
S
ERVICE
C
OMMANDS
31-4
Related Commands
queue bandwidth (31-6)
show queue mode (31-4)
show queue mode
This command shows the current queue mode.
Default Setting
None
Command Mode
Privileged Exec
Example
switchport priority default
This command sets a priority for incoming untagged frames. Use the no
form to restore the default value.
Syntax
switchport priority default default-priority-id
no switchport priority default
default-priority-id - The priority number for untagged ingress traffic.
The priority is a number from 0 to 7. Seven is the highest priority.
Default Setting
The priority is not set, and the default value for untagged frames
received on the interface is zero.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console#sh queue mode
Wrr status: Enabled
Console#