SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 655)

P
RIORITY
C
OMMANDS
(L
AYER
3
AND
4)
31-11
Priority Commands (Layer 3 and 4)
This section describes commands used to configure Layer 3 and Layer 4
traffic priority on the switch.
map ip port (Global Configuration)
This command enables IP port mapping (i.e., class of service mapping for
TCP/UDP sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Table 31-4 Priority Commands (Layer 3 and 4)
Command Function Mode Page
map ip port Enables TCP/UDP class of service
mapping GC 31-11
map ip port Maps TCP/UDP socket to a class of
service IC 31-12
map ip precedence Enables IP precedence class of service
mapping GC 31-13
map ip precedence Maps IP precedence value to a class of
service IC 31-13
map ip dscp Enables IP DSCP class of service
mapping GC 31-14
map ip dscp Maps IP DSCP value to a class of service IC 31-15
show map ip port Shows the IP port map PE 31-16
show map ip
precedence Shows the IP precedence map PE 31-17
show map ip dscp Shows the IP DSCP map PE 31-18