SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 542)

I
NTERFACE
C
OMMANDS
24-2
interface
This command configures an interface type and enter interface
configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-32)
• vlan vlan-id (Range: 1-4093)
• channel-id - Tuunk identifier. (Range: 1-32)
Default Setting
None
Command Mode
Global Configuration
Example
To specify port 4, enter the following command:
show interfaces
counters Displays statistics for the specified
interfaces NE, PE 24-14
show interfaces
switchport Displays the administrative and
operational status of an interface NE, PE 24-16
Console(config)#interface ethernet 1/4
Console(config-if)#
Table 24-1 Interface Commands (Continued)
Command Function Mode Page