SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 480)

U
SER
A
UTHENTICATION
C
OMMANDS
21-34
802.1X Port Authentication
The switch supports IEEE 802.1X (dot1x) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).
Table 21-12 802.1X Port Authentication Commands
Command Function Mode Page
dot1x
system-auth-control Enables dot1x globally on the switch. GC 21-35
dot1x default Resets all dot1x parameters to their
default values GC 21-35
dot1x max-req Sets the maximum number of times
that the switch retransmits an EAP
request/identity packet to the client
before it times out the authentication
session IC 21-36
dot1x port-control Sets dot1x mode for a port interface IC 21-36
dot1x operation-mode Allows single or multiple hosts on an
dot1x port IC 21-37
dot1x re-authenticate Forces re-authentication on specific
ports PE 21-38
dot1x re-authentication Enables re-authentication for all ports IC 21-39
dot1x timeout
quiet-period Sets the time that a switch port waits
after the Max Request Count has been
exceeded before attempting to acquire
a new client IC 21-39
dot1x timeout
re-authperiod Sets the time period after which a
connected client must be
re-authenticated IC 21-40