SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 57)

I
NITIAL
C
ONFIGURATION
2-11
Then press <Enter>. For a more detailed description of these parameters,
see “snmp-server host” on page 20-6. The following example creates a
trap host for each type of SNMP client.
Configuring Access for SNMP Version 3 Clients
To configure management access for SNMPv3 clients, you need to first
create a view that defines the portions of MIB that the client can read or
write, assign the view to a group, and then assign the user to a group. The
following example creates one view called “mib-2” that includes the entire
MIB-2 tree branch, and then another view that includes the IEEE 802.1d
bridge MIB. It assigns these respective read and read/write views to a
group call “r&d” and specifies group authentication via MD5 or SHA. In
the last step, it assigns a v3 user to this group, indicating that MD5 will be
used for authentication, provides the password “greenpeace” for
authentication, and the password “einstien” for encryption.
For a more detailed explanation on how to configure the switch for access
from SNMP v3 clients, refer to “Simple Network Management Protocol”
on page 5-1, or refer to the specific CLI commands for SNMP starting on
page 20-1.
Console(config)#snmp-server host 10.1.19.23 batman 20-6
Console(config)#snmp-server host 10.1.19.98 robin version 2c
Console(config)#snmp-server host 10.1.19.34 barbie version 3 auth
Console(config)#
Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included 20-13
Console(config)#snmp-server view 802.1d 1.3.6.1.2.1.17 included
Console(config)#snmp-server group r&d v3 auth mib-2 802.1d
20-15
Console(config)#snmp-server user steve group r&d v3 auth md5
greenpeace priv des56 einstien 20-18
Console(config)#