SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 653)

P
RIORITY
C
OMMANDS
(L
AYER
2)
31-9
show queue cos-map
This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Example
vlan priority
This command sets a fixed priority for all frames entering the specified
VLAN through a selected interface. Use the no form to restore the default
status.
Syntax
vlan vlan-id priority cos_value
no vlan vlan-id priority
• vlan-id - VLAN ID (Range: 1-4094)
• cos_value – A number from 0 to 7, where 7 is the highest priority.
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value: 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#