SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 530)

A
CCESS
C
ONTROL
L
IST
C
OMMANDS
23-16
access-list mac
This command adds a MAC access list and enters MAC ACL configuration
mode. Use the no form to remove the specified ACL.
Syntax
[no] access-list mac acl_name
acl_name – Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• When you create a new ACL or enter configuration mode for an
existing ACL, use the permit or deny command to add new rules to
the bottom of the list. To create an ACL, you must add at least one
rule to the list.
• To remove a rule, use the no permit or no deny command followed
by the exact text of a previously configured rule.
• An ACL can contain up to 32 rules.
Example
mask Sets a precedence mask for the ACL
rules MAC-Mask 23-21
show access-list mac
mask-precedence Shows the ingress or egress rule
masks for MAC ACLs PE 23-23
mac access-group Adds a port to a MAC ACL IC 23-23
show mac
access-group Shows port assignments for MAC
ACLs PE 23-24
Console(config)#access-list mac jerry
Console(config-mac-acl)#
Table 23-3 MAC ACL Commands (Continued)
Command Function Mode Page