Exec-timeout, Exec-timeout -28 – SMC Networks SMC TigerAccess SMC7824M/FSW User Manual

Page 398

Advertising
background image

S

YSTEM

M

ANAGEMENT

C

OMMANDS

19-28

Example
To set the timeout to two minutes, enter this command:

exec-timeout

This command sets the interval that the system waits until user input is
detected. Use the no form to restore the default.

Syntax

exec-timeout [seconds]
no exec-timeout

seconds - Integer that specifies the timeout interval.
(Range: 0 - 65535 seconds; 0: no timeout)

Default Setting

CLI: No timeout
Telnet: 10 minutes

Command Mode

Line Configuration

Command Usage

• If user input is detected within the timeout interval, the session is kept

open; otherwise the session is terminated.

• This command applies to both the local console and Telnet

connections.

• The timeout for Telnet cannot be disabled.
• Using the command without specifying a timeout restores the default

setting.

Example
To set the timeout to two minutes, enter this command:

Console(config-line)#timeout login response 120
Console(config-line)#

Console(config-line)#exec-timeout 120
Console(config-line)#

Advertising