SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 541)

24-1
C
HAPTER
24
I
NTERFACE
C
OMMANDS
These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Table 24-1 Interface Commands
Command Function Mode Page
interface Configures an interface type and enters
interface configuration mode GC 24-2
description Adds a description to an interface
configuration IC 24-3
speed-duplex Configures the speed and duplex
operation of a given interface when
autonegotiation is disabled IC 24-3
negotiation Enables autonegotiation of a given
interface IC 24-5
capabilities Advertises the capabilities of a given
interface for use in autonegotiation IC 24-6
flowcontrol Enables flow control on a given
interface IC 24-7
media-type Force port type selected for
combination ports IC 24-8
shutdown Disables an interface IC 24-9
switchport packet-rate Configures broadcast and multicast
storm control thresholds
IC 24-10
switchport block Prevents flooding of unknown unicast
or multicast packets IC 24-11
clear counters Clears statistics on an interface PE 24-12
show interfaces status Displays status for the specified
interface
NE, PE 24-13