SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 598)

S
PANNING
T
REE
C
OMMANDS
29-10
spanning-tree transmission-limit
This command configures the minimum interval between the transmission
of consecutive RSTP/MSTP BPDUs. Use the no form to restore the
default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
spanning-tree mst-configuration
This command changes to Multiple Spanning Tree (MST) configuration
mode.
Default Setting
No VLANs are mapped to any MST instance.
The region name is set the switch’s MAC address.
Command Mode
Global Configuration
Example
Console(config)#spanning-tree transmission-limit 4
Console(config)#
Console(config)#spanning-tree mst-configuration
Console(config-mstp)#