SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 680)

M
ULTICAST
F
ILTERING
C
OMMANDS
33-2
IGMP Snooping Commands
This section describes commands used to configure IGMP snooping on
the switch.
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form
to disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Table 33-2 IGMP Snooping Commands
Command Function Mode Page
ip igmp snooping Enables IGMP snooping GC 33-2
ip igmp snooping vlan
static Adds an interface as a member of a
multicast group GC 33-3
ip igmp snooping
version Configures the IGMP version for
snooping GC 33-4
ip igmp snooping
leave-proxy Suppresses leave messages unless
received from the last member port in
the group GC 33-5
ip igmp snooping
immediate-leave Immediately deletes a member port of a
multicast service if a leave packet is
received at that port and
immediate-leave is enabled for the
parent VLAN IC 33-6
show ip igmp snooping Shows the IGMP snooping and query
configuration
PE 33-7
show
mac-address-table
multicast Shows the IGMP snooping MAC
multicast list PE 33-8