Sun Microsystems SUN STOREDGETM 5310 NAS - Manual (Page 12)

xii Sun StorEdge 5310 NAS Troubleshooting Guide • December 2004
FIGURE 3-14 Lights on the Front of a Command Module 23
FIGURE 3-15 Lights on the Back of a Command Module 24
FIGURE 3-16 Power Supply Switches 28
FIGURE 3-17 Setting the Tray ID Switch 30
FIGURE 3-18 Verifying the Link Rate Setting 31
FIGURE 3-19 Removing and Installing a Drive 35
FIGURE 3-20 Power Supply Switches 38
FIGURE 3-21 Removing and Installing a Drive 38
FIGURE 3-22 Removing and Installing a Drive 42
FIGURE 3-23 Enterprise Management Window 45
FIGURE 3-24 Array Management Window 45
FIGURE 3-25 Enterprise Management Window 46
FIGURE 3-26 Device Tree Example 47
FIGURE 3-27 Array Management Window 51
FIGURE 3-28 Unconfigured and Free Capacity Nodes 66
FIGURE 3-29 Mappings View Window 68
FIGURE 3-30 SANshare Storage Partitioning Example 73
FIGURE 3-31 Host Port Definitions Dialog 75
FIGURE 3-32 Heterogeneous Hosts Example 76
FIGURE 3-33 DVE Modification Operation in Progress 79
FIGURE 3-34 Persistent Reservations Dialog 83
FIGURE 3-35 Monitoring Storage Array Health Using the Enterprise Management Window 85
FIGURE 3-36 Event Monitor Configuration 87
FIGURE 3-37 Event Monitor Example 88
FIGURE 3-38 Problem Notification in the Array Management Window 91
FIGURE 3-39 Displaying the Recovery Guru Window 92
FIGURE 3-40 Recovery Guru Window Example 93
FIGURE 3-41 Status Changes During an Example Recovery Operation 94
FIGURE 3-42 Status Changes When The Example Recovery Operation is Completed 95
FIGURE 4-1 The lifecycle of a transaction in StorEdge File Replicator 4