4 updating firmware and nvsram on the array, Updating firmware and nvsram on the array 95, Figure 3-42 – Sun Microsystems SUN STOREDGETM 5310 NAS User Manual
Page 295
Advertising
Chapter 3
Storage Arrays
3-95
FIGURE 3-42
Status Changes When The Example Recovery Operation is Completed
After you replace the failed drive in the drive module:
■
The storage array status in the Logical View returns to Optimal.
■
The storage array status in the Enterprise Management Window changes from
Needs Attention to Optimal.
■
The Recovery Guru button stops blinking.
Note –
For the Recovery Guru button to register Optimal status, the failed battery
must be replaced as well.
3.4
Updating Firmware and NVSRAM on
the Array
To upgrade the controller firmware and NVSRAM, do the following:
Advertising