Sun Microsystems SUN STOREDGETM 5310 NAS - Manual (Page 249)

Chapter 3 Storage Arrays 3-49
3.3.6.3 The Array Management Window
The Array Management Window (Figure 3-27) is used to configure and maintain the
logical and physical components of a storage array and to view and define volume-
to-LUN mappings.
Enterprise Management Window Toolbar
The Enterprise Management Window toolbar buttons are described in Table 3-5.
TABLE 3-5 Enterprise Management Window Toolbar Buttons
Toolbar Button Description
Automatically detect
new devices Activates the Automatic Discovery option that detects hosts and
storage arrays on the local subnetwork and adds them to the
Enterprise Management Window.
Rescan selected host
for new devices Rescans the highlighted host for any newly attached storage arrays.
Before using this option, the new storage arrays must be physically
attached to the host and the host-agent software residing on the host
must be restarted.
Note This option is available only when you select a host in the
Device Tree.
Synchronize Event
Monitor Synchronizes the event monitor with any changes made in the
Enterprise Management Window, such as adding or removing
devices or adding alerts. Note This option is available only if the
configurations of the Enterprise Management Window and the event
monitor are not synchronized.
Add host/device Opens the Add Device dialog for manually adding hosts or storage
array controllers to the Enterprise Management Window.
Remove host/device Removes the selected storage array or the selected host and its
attached storage arrays from the Enterprise Management Window.
Note This option is available only when a storage array in the
Device Tree or Device Table is selected, or a host in the Device Tree
is selected.
Launch an Array
Management
Window Starts an Array Management Window for the selected storage array.
Note This option is available only when a storage array in the
Device Tree or Device Table is selected. Starts an Array Management
Window for the selected.