SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 117)

S
IMPLE
N
ETWORK
M
ANAGEMENT
P
ROTOCOL
3-63
authenticationFailure
a
1.3.6.1.6.3.1.1.5.5 An authenticationFailure
trap signifies that the
SNMPv2 entity, acting in
an agent role, has received
a protocol message that is
not properly
authenticated. While all
implementations of the
SNMPv2 must be capable
of generating this trap, the
snmpEnableAuthenTraps
object indicates whether
this trap will be generated.
RMON Events (V2)
risingAlarm
1.3.6.1.2.1.16.0.1 The SNMP trap that is
generated when an alarm
entry crosses its rising
threshold and generates
an event that is
configured for sending
SNMP traps.
fallingAlarm 1.3.6.1.2.1.16.0.2 The SNMP trap that is
generated when an alarm
entry crosses its falling
threshold and generates
an event that is
configured for sending
SNMP traps.
Private Traps
swPowerStatus
ChangeTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.1 This trap is sent when the
power state changes.
swIpFilterRejectTrap 1.3.6.1.4.1.259.6.10.94.2.1.0.40 This trap is sent when an
incorrect IP address is
rejected by the IP Filter.
a. These are legacy notifications and therefore must be enabled in conjunction with the
corresponding traps on the SNMP Configuration menu (page 3-51).
Table 3-5 Supported Notification Messages (Continued)
Object Label Object ID Description