Radius client, Radius client -94, Table 4-29 radius client commands -94 – SMC Networks SMC Tiger 10/100 SMC6128L2 User Manual

Page 394

Advertising
background image

C

OMMAND

L

INE

I

NTERFACE

4-94

• You can specify three authentication methods in a single command to

indicate the authentication sequence. For example, if you enter
authentication enable radius tacacs local,” the user name and
password on the RADIUS server is verified first. If the RADIUS
server is not available, then authentication is attempted on the
TACACS+ server. If the TACACS+ server is not available, the local
user name and password is checked.

Example

Related Commands

enable password - sets password for changing command modes (4-36)

RADIUS Client

Remote Authentication Dial-in User Service (RADIUS) is a logon
authentication protocol that uses software running on a central server to
control access to RADIUS-aware devices on the network. An
authentication server contains a database of multiple user name/password
pairs with associated privilege levels for each user or group that require
management access to a switch.

Console(config)#authentication enable radius
Console(config)#

Table 4-29 RADIUS Client Commands

Command

Function

Mode Page

radius-server host

Specifies the RADIUS server

GC

4-95

radius-server port

Sets the RADIUS server network port GC

4-96

radius-server key

Sets the RADIUS encryption key

GC

4-96

radius-server retransmit Sets the number of retries

GC

4-97

radius-server timeout

Sets the interval between sending
authentication requests

GC

4-98

show radius-server

Shows the current RADIUS settings

PE

4-98

Advertising