SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 544)

C
OMMAND
L
INE
I
NTERFACE
4-244
ip igmp profile
This command creates an IGMP filter profile number and enters IGMP
profile configuration mode. Use the no form to delete a profile number.
Syntax
[no] ip igmp profile profile-number
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or
denied to join. The same profile can be applied to many interfaces, but
only one profile can be assigned to one interface. Each profile has only
one access mode; either permit or deny.
Example
permit, deny
This command sets the access mode for an IGMP filter profile. Use the no
form to delete a profile number.
Syntax
{permit | deny}
Default Setting
Deny
Command Mode
IGMP Profile Configuration
Command Usage
• Each profile has only one access mode; either permit or deny.
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#