SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 529)

M
ULTICAST
F
ILTERING
C
OMMANDS
4-229
Example
Related Commands
map ip dscp (Global Configuration) (4 -226)
map ip dscp (Interface Configuration) (4 -227)
Multicast Filtering Commands
This switch uses IGMP (Internet Group Management Protocol) to query
for any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data
out to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to
receive the multicast service.
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 0
Eth 1/ 1 3 0
.
.
.
Eth 1/ 1 61 0
Eth 1/ 1 62 0
Eth 1/ 1 63 0
Console#
Table 4-65 Multicast Filtering Commands
Command Groups Function Page
IGMP Snooping Configures multicast groups via IGMP snooping
or static assignment, sets the IGMP version,
displays current snooping and query settings, and
displays the multicast service and group
members 4-230
IGMP Query Configures IGMP query parameters for
multicast filtering at Layer 2 4-235
Static Multicast
Routing Configures static multicast router ports 4-240