SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 555)

M
ULTICAST
VLAN R
EGISTRATION
C
OMMANDS
4-255
Example
The following configures one source port and several receiver ports on the
switch, enables immediate leave on one of the receiver ports, and statically
assigns a multicast group to another receiver port:
show mvr
This command shows information about the global MVR configuration
settings when entered without any keywords, the interfaces attached to the
MVR VLAN using the interface keyword, or the multicast groups
assigned to the MVR VLAN using the members keyword.
Syntax
show mvr [interface [interface]| members [ip-address]]
• interface
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
• ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
Default Setting
Displays global configuration settings for MVR when no keywords are
used.
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/5
Console(config-if)#mvr type source
Console(config-if)#exit
Console(config)#interface ethernet 1/6
Console(config-if)#mvr type receiver
Console(config-if)#mvr immediate
Console(config-if)#exit
Console(config)#interface ethernet 1/7
Console(config-if)#mvr type receiver
Console(config-if)#mvr group 225.0.0.5
Console(config-if)#